II-54 Setup of Other Video Related Items (Video (Misc)) / Displaying Various Information (Information) / Installing Application Software and Firmware (Install)
Chapter 8 Setup ([Setup] Menu)
Setup of Other Video Related Items (Video (Misc))Make other settings related to videos in the items of the [Setup] menu > [Video (Mis c)] menu.
Details on [Video (Misc)] Menu
Displaying Various Information (Information)You can confirm various information on the application
software and the firmware in the items of [Setup] menu >
[Information].
Installing Application Software and Firmware (Install)Install application software and firmware onto the unit
from [Setup] menu > [Install].
It is not possible to individually select which software to
install. All of the application software and firmware are
installed together at one time.
1
Copy the software to be installed to the USB flash
drive and then insert the USB flash drive into the USB
connector of the unit.
Copy the software to be installed to the following
folder.
Folder name: \Sony\MCS\INSTALL
2
Display the [Setup] menu > [Install] menu and then
press the V4 knob to start the installation.
When installation is complete, a message prompting
you to restart the unit appears. Confirm that no errors
have occurred (i.e., “E” is not displayed).
For details on the message that appears at installation
completion, see “Message List” (page II-55).
3
Press the V3 knob (OK), and then turn off the unit and
turn it on again.
4
Check the version information of the application
software and firmware under [Information] in the
[Setup] menu.
Menu item Description Knob Parameter Meaning Setting range
Switch
Timing
Set the timing for switching videos.
Tip
If the signal format is set to 720p, this selection is
ignored.
V4 Timing Switching timing Any (fastest field
that can be
processed), Field1
(first field), Field2
(second field)
Fade To
Black
Enable or disable the FTB button of the transition
control block.
V4 Button Enables/disables
FTB button
Enbl (enable)/Disbl
(disable)
Tip
Tip
Tip