4

Checking the accessories

For all models

Table-Top Stand (1)*1
Remote control (1)*2
Size AAA batteries (2)

For KDL-60NX801, KDL-60/52/

46NX800 and KDL-46/40NX700 models

AC power cord (1)
Bottom Cover (1)*3 (KDL-60NX801 and
KDL-60/52/46NX800 only)
Stand Rear Cover (1)*3
Fixing screws for Table-Top Stand
(M5 × 16) (4)*3
Assembling Screws for Table-Top
Stand (M5 × 16) (4) (KDL-40NX700 only)
Black Spacers (4)*4 (KDL-52/46NX800
only)
Silver Spacers (4)*4 (KDL-60NX801 and
KDL-60NX800 only)
Screws (M6 × 20) (4)*4 (KDL-60NX801
and KDL-60NX800 only)

For KDL-55NX811, KDL-60/55/

46NX810, KDL-46/40NX711 and KDL-

46/40NX710 models

Hexagon wrench (1)
Assembling screws for Table-Top Stand (4)
(KDL-55NX811, KDL-60/55/46NX810,
KDL-46NX711 and KDL-46NX710 only)
Assembling screws for Table-Top Stand (2)
(KDL-40NX711, KDL-40NX710 only)
3D Glasses (battery included) (2)
(KDL-55NX811 and KDL-46/40NX711 only)
Pouch for 3D Glasses (2)
(KDL-55NX811 and KDL-46/40NX711 only)
3D Sync Transmitter (1)
(KDL-55NX811 and KDL-46/40NX711 only)
Double-sided tape (2)
(KDL-55NX811and KDL-46/40NX711 only)
*1K DL-60NX801/60NX800 models are shipped
with the parts attached to the TV.
KDL-55NX811, KDL-60/55/46NX810, KDL-
46/40NX711, KDL-46/40NX710 and KDL-
40NX700 models requires assembling. Refer to
other leaflet to assemble the Table-Top Stand.
*2Pl ease refer to the model name printed on the
remote control.
*3K DL-60NX801/60NX800 models are shipped
with the parts attached to the TV.
*4Th ese screws and spacers are required when
installing an optional Wall-Mount Bracket. You
must use these screws instead of the ones
provided with the bracket for safety reasons. Be
sure to keep them in a safe place until you are
ready to use the Wall-Mount Bracket. See
page23 for the recommended Wall-Mount
Bracket for your TV.

Inserting batteries into the

remote control

1Remove the protection sheet.
2Push and slide the cover upward.
Guidelines for Remote Control
•Point your remote control directly at the IR
sensor located on your TV.
•Make sure that no objects are blocking the
path between the remote control and the IR
sensor on your TV.
•Fluorescent lamps can interfere with your
remote control; try turning off the fluorescent
lamps.
•If you are having problems with the remote
control, reinsert or replace your batteries and
make sure that they are correctly inserted.