28
,When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for HDMI]
function, you may be unable to control
the TV from the player.
– if you change the HDMI connection,
disconnect and reconnect the AC power
cord, or a power failure occurs, try the
following: 1Switch the input selector of
the AV amplifier (receiver) so that the
picture from the player appears on the
TV screen. 2Set [Control for HDMI] to
[Off], then set [Control for HDMI] to
[On] (page 24). Refer to the instruction
manual supplied with the AV amplifier
(receiver).
The System Power-Off function does not
work (BRAVIA Sync).
,Check that [Control for HDMI] and
[HDMI: Linked to TV-off] are set to [On]
(page 24).
Playback does not start from the
beginning of content.
,Press OPTIONS, and select [Play from
beginning].
Playback does not start from the resume
point where you last stopped playing.
,The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
The disc tray does not open and
“LOCKED” or “TLK ON” appears on the
front panel display.
,When “LOCKED” appears, the player is
locked. To cancel the Child Lock, hold
down N on the player until “UNLOCK”
appears on the front panel display (page 7).
,When “TLK ON” appears, contact your
Sony dealer or local authorized Sony
service facility.
The disc tray does not open and you
cannot remove the disc even after you
press Z.
,Try the following: 1Turn the player off,
and disconnect the AC power cord.
2Reconnect the AC power cord while
pressing down Z on the player. 3Keep
pressing down Z on the player until the tray
opens. 4Remove the disc. 5When
“OPEN” appears on the front panel display,
hold down [/1 on the player for more than
10 seconds until the player turns off.
“Exxxx” or “FAN ERR” appears on the
front panel display.
,When “Exxxx” appears, contact your
nearest Sony dealer or local authorized
Sony service facility and give the error
code.
,When “FAN ERR” appears, try the
following: 1Check that the ventilation
holes on the rear of the player are not
blocked. 2Place the player in a location
with adequate ventilation to prevent heat
build-up in the player.
The player does not respond to any button.
,Moisture has condensed inside the player
(page 3).
,Hold down [/1 on the player for more than
10 seconds until the indicators on the front
panel display turn off.
If the player still does not respond to any
button, disconnect then reconnect the AC
power cord.
Others