16GB
Getting Started
3Reattach the speaker stand by engaging the protrusions on the stand in the holes for
either a vertical or upward angle.
4Thread the speaker cord though the slit of the stand base to prevent the cord from being
twisted or pinched.
5Tighten the screws to secure the speaker stand.
Note
• Be careful not to pinch the speaker cords while tightening the screws.
(BDV-F700 only)
For assembling the speakers, refer to “Speaker Installation Guide.”
Assembling the speakers
Vertical or
upward angle
Vertical angle Upward angle
Screws