48GB
Note
•Depending on the input stream, [Dist ance] may not
be effective.
x[Level]
You can adjust the sound level of the speakers.
You can set the parameters from –6.0 dB to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.
[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Subwoofer] 0.0 dB: Set the subwoofer level.
x[Test Tone]
The speakers will emit a test tone to adjust
[Level].
[Off]: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each speaker
in sequence while adjusting level. When you
select one of the [Speaker Settings] items, the
test tone is emitted from each speaker in
sequence.
Adjust the sound level as follows.
1Set [Test Tone] to [On].
2Press X/x to select [Level], then press
.
3Press X/x to select the desired speaker
type, then press .
4Press C/c to select the left or right
speaker, then press X/x to adjust the
level.
5Press .
6Repeat Steps 3 to 5.
7Press RETURN.
The system returns to the previous di splay.
8Press X/x to select [Test Tone], then
press .
9Press X/x to select [Off], then press
.
Note
•The test tone signals are not output from the HDMI
OUT jack.
Ti
p
•To adjust the volume of all the speakers at one time,
press 2 +/–.
Using the Sleep Timer
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
The time can be preset in intervals of 1 0
minutes.
Press SLEEP.
Each time you press SLEEP, the minutes display
(the remaining time) changes by 10 minutes.
When you set the sleep timer, “SLEEP” flashes
in the front panel display.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired
time.
Changing the
Illumination LED Lighting
Type
(Illumination Mode)
You can select to have the illumination LED
light up either perpetually or only at certain
times.
1Press SYSTEM MENU.
2Press X/x repeatedly until “ILLUM
MODE” appears in the front panel
display, then press or c.
Selecting when to light up the
illumination LED