62GB
Operation
There is no digital sound from
the HDMI OUT jack when using
the Audio Return Channel
function.
•Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]
(page55). Also, set [Au dio Return Channel] in [HDMI Settings] of [System
Settings] to [Auto] (page55).
•Make sure that your TV is com patible with the Audio Return Channel function.
•Make sure that an HDMI cable is connected to a jack on your TV that is
compatible with the Audio Return Channel function.
•The sampling frequency of the input stre am is more than 48 kHz.
The system does not output
sound correctly when connected
to a set-top box.
•Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]
(page47).
Severe hum or noise is heard. •Check that the connecting cords are away from a tra nsformer or motor, and at
least 3 meters away from your TV set or a fluorescent light.
•Move your TV away from t he audio components.
•Clean the disc.
The sound loses stereo effect
when you play a CD.
•Select stereo sound by pressing (page41).
The surround effect is difficult to
hear when you are playing a
sound track of Dolby Digital,
DTS, or MPEG audio.
•Check the surround setting (page 32).
•Check the speaker connections and settings (pages 20, 47).
•Depending on the BD/DVD, the output signal may not be the entire 5.1 channel.
It may be monaural or stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
The beginning of the sound is cut
off.
•Set the sound mode to “MOVIE” or “MUSIC” (page 41).
•Select “AUTO” for “SUR.SETTING” (page32).
The sound effects are disabled. •The effects of SOUND MODE and “SUR.SETTING” may be disabled
depending on the input stream (page 53).
Distortion occurs in the sound of
a connected component.
•Reduce the input level for the connected com ponent by setting [Attenuate -
AUDIO] (page53).
Symptom Problems and solutions
Radio stations cannot be tuned
in.
•Check that the antenna ( aerial) is connected securely. Adjust the antenna
(aerial) or connect an external antenna (aeria l) if necessary.
•The signal strength of the stations is too weak (when tuni ng in with automatic
tuning). Use direct tuning.
The disc does not play. •You are attempting to play a disc with a format tha t cannot be played by this
system (page66).
•The region code on the BD/DVD does not match the system.
•Moisture has condensed inside the unit and may cause damage to the lenses.
Remove the disc and leave the unit turned on for about half an hour.
•The system cannot play a recorded disc that is not correctly finalized (page66).
File names are not displayed
correctly.
•The system can only display ISO 8859-1-complian t character formats. Other
character formats may be displayed differently.
•Depending on the writing software used, the input characters may be displa yed
differently.
A disc does not start playing
from the beginning.
•Resume play has been selected. Press OPTIONS and select [Play from start],
then press .
•The title or BD/DVD menu automatically appears on the TV screen.
Symptom Problems and solutions