2Thread the speaker cord () into the bottom of the post ( or ) and
out the opposite end.
You can choose either the long posts () or the short posts () to assemble the
speakers.
Screw holes
or
3Thread the speaker cord () through the hole on the bottom of the
speaker () and out the hole on the rear.
4Insert the post ( or ) into the hole on the bottom of the speaker
(), so that the screw on the top of the post faces the front of the
speaker.
Screw
or
5Secure the post ( or ) with the screws ().
or
6Connect the speaker cord (). Then, secure the speaker cord by running
it through the slit.
Connect the speaker cord with the colored tube to , and the speaker cord without the
colored tube to .
Colored
tube
Slit
Label
Note
Match the color of the tube and label.
Continued

Speaker Installation

Guide

4-187-308-11(1)

BDV-HZ970W

© 2010 Sony Corporation Printed in Malaysia
(1)
Assembling the front speakers
Required parts
×2 ×2 ×8
 
×2
Front speaker (R):
with red colored tube
Front speaker (L):
with white colored tube
×2×2
1Thread the speaker cord () through the bottom hole in the base
().
Colored tube