22US
Getting Started
Step 5: Performing the
Easy Setup
Follow the Steps below to make the basic
adjustments and network settings for the system.
Displayed items vary depending on the country
model.
1Insert two R6 (size AA) batteries
(supplied) by matching the 3 and #
ends on the batteries to the markings
inside the compartment.
2Turn on the TV.
3Press [/1.
4Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
5Perform [Easy Initial Settings]. Follow
the on-screen instructions to make the
basic settings using C/X/x/c and .
Depending on the connection method
(page16 ), perform the following setting.
• HDMI cable connection: Follow the
instructions that are displayed on the TV
screen.
• Video cord connection: Select [16:9] or
[4:3] so that the picture is displayed
correctly.
For details about [Auto Calibration]
settings in [Easy Initial Settings], see
“Calibrating the Appropriate Speaker
Settings Automatically” (page35).
6After completing of [Easy Initial
Settings], perform [Easy Network
Settings]. Press C/X/x/c to select [Easy
Network Settings], then press .
The Easy Network Settings display
appears.
7Follow the on-screen instructions to
make the network settings using C/X/x/
c and .
If the system cannot connect to the network,
see “Network connection” (page 55) or
“Wireless LAN connection” (page 55).
To recall the Easy Initial Settings
display/Easy Network Settings
display
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select [Setup].
3Press X/x to select [Easy Setup], then
press .
4Press X/x to select the setting, then
press .
• [Easy Initial Settings]
• [Easy Network Settings]
The Easy Initial Settings display/Easy
Network Settings display appears.
C/X/x/c