Additional Information
51US
The [Control for HDMI] function does not
work (“BRAVIA” Sync).
tCheck that [Control for HDMI] is set to [On]
(page44).
tIf you change the HDMI connection, turn the
system off and on again.
tIf power failure occurs, set [Control for HDMI]
to [Off], then set [Control for HDMI] to [On]
(page44).
tCheck the following and refer to the operating
instructions supplied with the componen t.
• The connected component is c ompatible with
the [Control for HDMI] function.
• The connected component’s setting for the
[Control for HDMI] function is correct.
The system cannot connect to the network.
tCheck the network connection (page 20) and
the network settings (page 44).
You cannot connect your PC to the Internet
after [Wi-Fi Protected Setup (WPS)] is
performed.
tThe wireless settings of the router may change
automatically if you use the Wi-Fi Protected
Setup function before adjusting the sett ings of
the router. In this case, change the wireless
settings of your PC accordingly.
The system cannot connect to the network or
the network connection is unstable.
tCheck if the wireless LAN router is on.
tCheck the network connection (page 20) and
the network settings (page 44).
tDepending on the usage environment,
including the wall material, radio wave
reception conditions, or obstacles between the
system (or USB wireless LAN adapter) and the
wireless LAN router, the possible
communication distance may be shortened.
Move the system and the wireless LAN router
closer to each other.
tDevices that use a 2.4 GHz frequency band,
such as a microwave, Bluetooth, or digital
cordless device, may interrupt communication.
Move the unit away from such devices, or turn
off such devices.
The desired wireless router is not shown in
the wireless network list.
tPress RETURN to return to the previous
screen, and try [Wireless Setup(built-in )]/
[USB Wireless Setup] again. If the desired
wireless router is still not detect ed, select
[Manual registration].
“BRAVIA” Sync ([Control for
HDMI])
Network connection
Wireless LAN connection