7

PERIPHERALS

PERIPHERALS

As Standalone Camera

Controller

Directly connected to the Sony
DXC-D30P/ D30WSP Video Camera
through a 10-pin remote connector, the
RCP-TX7 can be used as a standalone
remote control unit offering the same
functionality as the RM-M7G.
(This is only possible
with the
DXC-D30P/
D30WSP.)

Basic Camera Control with

COU-TX7

The Sony COU-TX7 Camera Operation
Unit can be attached to form a part of the
front panel of the CCU-TX7P to provide
basic control of camera operation and
painting. This is useful when using the
CCU-TX7P in limited space, such as in
field production vehicles.
●Convenient Liquid Crystal Display
The RCP-TX7 has an LCD (Liquid
Crystal Display) on the control panel.
This LCD shows menu status information
on the current adjustment. Function
status such as Detail Level, Gamma,
Knee, White Balance and Black (Flare)
Balance can also be displayed on the
LCD by using an INDICATION button.
The LCD also displays troubleshooting
hints when an operational difficulty arises
from use of the RCP-TX7 controls.
COU-TX7
DXF-51(5-inch)
Monochrome Viewfinder
DXC-D30P/
D30WSP or
DXC-637P
Camera Head
DXF-701WSCE(*) or
DXF-601CE
Viewfinder
(*) DXF-701WSCE can be
used only with DXC-D30P/D30WSP.
WRR-810A + DC-WL800(DC Pack Unit)
Wireless Microphone Receiver
Zoom Lens
CA-TX7P
Camera Adaptor
Triax Cable
Intercom
(Headset)
CCU-TX7P
Camera Control Unit Waveform
Monitor Vectorscope
Picture Monitor
SDI Output
(w/DXBK-701)
AC
DC 12V
COU-TX7
Camera Operation
Unit
RCP-TX7
Remote Control Panel
CCA-7
(10-pin/10-pin)
(Max.50m)
Either the COU-TX7 or the
RCP-TX7 is used as a
control panel of the CCU-TX7P.
Intercom
(System & Headset)
SYSTEM CONFIGURATIONSYSTEM CONFIGURATION