TIME
FADE

Fading out at the specified time (Time Fade)

You can have the player fade out automatically by specifying the playing time. Once you set the Time Fade, it works twice, that is, the play fades out at the end of both sides of a tape.

1Press EDIT/TIME FADE repeatedly before you

start playing until and “A” in the A indication appear in the display.

2Press 0or )to specify the playing time. Each time you press these buttons, the display changes as shown below with the playing time of one side.

 

n

C-46 23.00

N

n

C-54 27.00

N n

C-60 30.00

N

 

 

 

n

 

N

n

 

N n

 

N

 

 

 

- -. - -

C-90 45.00

C-74 37.00

 

3Press ·to start playing.

At the specified time the play fades out and the

player pauses. “B” in the

B indication appears

in the display.

 

4To record on side B, reverse the tape and press · or Pon the player to resume playing.

Again, the play fades out at the specified time.

To cancel Time Fade

Press EDIT/TIME FADE.

You can freely specify the playing time

See “You can freely specify the tape length” on page 22.

You can change discs during Time Fade

The specified fade-out time is counted only during playing. So, you can change discs if the play ends before the specified fade-out time (for example, when you record CD-singles on a tape).

You can fade in to resume playing in Step 4

After you reverse the tape, press FADER.

Note

If you press the 0or )button during Time Fade Play, Time Fade will be canceled.

Recording From CDs

Adjusting the Recording Level (Peak Search)

The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording.

 

 

 

PEAK SEARCH

p

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1Before you start playing, press PEAK SEARCH. “PEAK” flashes in the display and the player starts scanning the disc searching for the highest peak level.

After scanning all the tracks, the player repeats the portion with the highest peak level.

2Adjust the recording level on the deck.

3Press pon the player to stop Peak Search. “PEAK” disappears from the display.

Notes

∙The portion with the highest level may differ every time you try the adjustment on the same disc. The difference is, however, so slight that you won’t find any problem in adjusting the recording level precisely.

∙Peak Search does not operate while you open the disc tray by pressing the EX-CHANGE button.

23