12

Searching a track by listening

to track passages — ZAPPIN

™

While playing back short track passages in a
CD or USB device in sequence, you can
search for a track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
1Press  (ZAP) during playback.
Playback starts from a passage of the
next track. You can select the playback
time (page15).
2Press the select button or  (ZAP)
when a track you want to listen is
played back.
The track that you select returns to
normal play mode from the beginning.
Pressing (BACK) also confirms a
track to playback.
Tips
• Press  +/– in ZAPPIN mode to skip a
track.
• Press / (ALBUM /) in ZAPPIN
mode to skip album.
Sound Settings and Setup Menu

Changing the sound

settings

Adjusting the sound

characteristics

1During reception/playback, press the
select button.
2Rotate the control dial until the desired
menu item appears, then press it.
3Rotate the control dial to select the
setting, then press it.
4Press (BACK).
The following items can be set:
The part of each track to play
back in ZAPPIN mode.
Track
 (ZAP) pressed.
EQ7 PRESET (page13)
EQ7 SETTING (page13)
POSITION
SET POSITION (Listening Position
setting) (page14)
ADJ POSITION*1 (Listening Position
adjustment) (page14)
SET SW POS*1 *2 (Subwoofer Position
setting) (page14)
BALANCE
Adjusts the sound balance: “RIGHT-15”
– “CENTER” – “LEFT-15.”
FADER
Adjusts the relative level: “FRONT-15” –
“CENTER” – “REAR-15.”
DM+ (page14)
RB ENH (Rear Bass Enhancer) (page15)