CDX-GT410U
Display items for CD / Repeat and shuffle play / Playback USB devices / Display items for USB / Listening to music on a Mass Storage Class type audio device / Listening to music on “Walkman” (ATRAC Audio Device) / Adjusting the sound characteristics / Customizing the equalizer curve / Adjusting setup items
Location of controls and basic operations
Main unit
12 3 | 4 | 5 |
| 6 | 7 8 | |
OFF |
|
|
|
|
|
|
| PUSH SELECT |
|
|
|
|
|
EQ3 | SOURCE |
|
|
|
|
|
SEEK | SEEK |
|
|
|
|
|
PTY | MODE |
|
|
|
|
|
| DIM | GP/ALBM | REP | SHUF | PAUSE |
|
| DSPL | 1 2 | 3 | 4 5 | 6 AF/TA | AUX |
9 q; qa qs qdqfqg |
| qh | qj qk | |||
|
| |||||
Card remote commander |
| Before using the card remote commander for the | ||||
|
|
| first time, remove the insulation film. |
Insert the disc (label side up), and playback starts automatically. You can play
To select PTY in RDS. After pressing , press
SEEK |
CD/MD*1/USB*2: |
To skip tracks (press); skip tracks |
•Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.
•Pressing the RESET button will erase the clock setting and some stored contents.
Number buttonsCD/MD*1/USB*2:
/: GP*5/ALBM*6To skip groups/albums (press); skip groups/albums continuously (press and hold)*7.
: REP: SHUF: PAUSE*8To pause playback. To cancel, press again.Radio:To receive stored stations (press); store stations (press and hold). AF/TA button |
AF (Alternative Frequencies)/TA (Traffic |
Announcement), TP (Traffic Programme): |
To receive stored stations (press); store stations (press and hold).
*1 When an MD changer is connected.
*2 When a USB device is connected.
*3 When a CD/MD changer is connected.
*4 When an ATRAC Audio Device is connected.
*5 When an ATRAC CD is played.
*6 When an MP3/WMA/AAC is played.
*7 If the changer/USB device is connected, the operation is different.
*8 When playing back on this unit.
Notes
• | When ejecting/inserting a disc, keep any USB |
• | devices disconnected to avoid damage to the disc. |
If the unit is turned off and the display disappears, | |
| it cannot be operated with the card remote |
Detaching the front panel
You can detach the front panel of this unit to prevent theft.1Press .The unit is turned off.2 Press , then pull it off towards you.Attaching the front panel
Engage part of the front panel with part of the unit, as illustrated, and push the left side into position until it clicks.
Setting the clock
The clock uses aYou can set the clock automatically with the RDS feature. For details, see “Adjusting setup items” on the reverse side of the sheet, and set to
Storing stations automatically
— BTM
The unit selects strong signal stations and stores them. You can store up to 6 stations per band (FM1, FM2, FM3, MW, or LW).
Caution
When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.
1 | Press repeatedly until |
| “TUNER” appears. |
| To change the band, press |
| repeatedly. You can select from FM1, FM2, |
| FM3, MW or LW. |
2 | Press and hold the select button. |
| The setup display appears. |
3 | Press the select button repeatedly |
| until “BTM” appears. |
4 | Press +. |
| The unit stores stations in order of frequency |
| on the number buttons. |
| A beep sounds when the setting is stored. |
1
4 ql
qf
w;
OFFATT
SOURCE SEL MODE
+
–
DSPL SCRL
1 2 3
4 5 6
+
VOL
–
wa ws qd
wd
wf
wg
To adjust the equalizer curve, see “Customizing the equalizer curve” on the reverse side of this sheet.
Volume control dial/select buttoncontinuously (press, then press again within |
about 1 second and hold); reverse/fast- |
forward a track (press and hold). |
Radio: |
To tune in stations automatically (press); |
find a station manually (press and hold). |
To change display items (press); change the display brightness (press and hold).
RESET button (located behind the front |
panel) |
Each time you press , the item |
changes as follows: |
The following buttons on the card remote commander have also different buttons/functions from the unit.
()/ () buttonsTo control CD/radio/MD/USB, the same as ATT (attenuate) button |
commander unless on the unit is |
pressed, or a disc is inserted to activate the unit |
first. |
Be sure to set the Auto Off function. The unit will shut off completely and automatically in the set time after the unit is turned off, which
prevents battery drain. If you do not set the Auto Off function, press and hold
until the display disappears each time you turn the ignition off.A
B
Detach the front panel and press the RESET |
button with a pointed object, such as a ball- |
point pen. |
To attenuate the sound. To cancel, press |
again. |