14
Searching a track by listening
to track passages — ZAPPIN
™
While playing back short track passages in a
CD or USB device in sequence, you can
search for a track you want to listen to.
ZAPPIN mode is suitable for searching for a
track in shuffle or shuffle repeat mode.
1Press (ZAP) during playback.
Playback starts from a passage of the
next track. You can select the playback
time (page 18).
2Press the select button or (ZAP)
when a track you want to listen is
played back.
The track that you select returns to
normal play mode from the beginning.
Pressing (BACK) also confirms a
track to playback.
Tips
• Press +/– in ZAPPIN mode to skip a
track.
• Press / (ALBUM /) in ZAPPIN
mode to skip album.
Sound Settings and
Setup Menu
Changing the sound
settings
Adjusting the sound
characteristics
1During reception/playback, press the
select button.
2Rotate the control dial until the desired
menu item appears, then press it.
3Rotate the control dial to select the
setting, then press it.
4Press (BACK).
The following items can be set:
The part of each track to play
back in ZAPPIN mode.
Track
(ZAP) pressed.
EQ7 PRESET (page 15)
EQ7 SETTING (page 15)
POSITION
SET POSITION (Listening Position
setting) (page 16)
ADJ POSITION*1 (Listening Position
adjustment) (page 16)
SET SW POS*1 *2 (Subwoofer Position
setting) (page 16)
BALANCE
Adjusts the sound balance: “RIGHT-15”
– “CENTER” – “LEFT-15.”
FADER
Adjusts the relative level: “FRONT-15” –
“CENTER” – “REAR-15.”
DM+ (page 16)
RB ENH (Rear Bass Enhancer) (page 17)