24

Using rear speakers as

subwoofer — Rear Bass

Enhancer

Rear Bass Enhancer enhances the bass
sound by applying the low pass filter setting
(page25) to the rear speakers. This function
allows the rear speakers to work as a
subwoofer if one is not connected.
1During reception/playback, press the
select button.
2Rotate the control dial until
“REARBAS ENH” appears, then press
it.
3Rotate the control dial to select from
“1,” “2” or “3,” then press it.
4Press (BACK).
Adjusting setup items
1Press and hold the select button.
The setup display appears.
2Rotate the control dial until the desired
item appears, then press it.
3Rotate the control dial to select the
setting, then press it.*
The setting is complete.
4Press (BACK).
*Fo r Custom Color setting, you need to take
additional steps (page 20).
For CLOCK-ADJ and BTM settings, step 4 is
not necessary.
The following items can be set depending
on the source and setting:
CLOCK ADJ (Clock Adjust) (page5)
CT (Clock Time)
Activates the CT function: “ON,” “OFF”
(page10).
BEEP
Activates the beep sound: “ON,” “OFF.”
CAUT ALM*1 (Caution Alarm)
Activates the caution alarm: “ON,”
“OFF” (page5).
AUX-A*1 (AUX Audio)
Activates the AUX source display: “ON,”
“OFF” (page26).
AUTO OFF
Shuts off automatically after a desired
time when the unit is turned off: “NO,”
“30S (Seconds),” “30M (Minutes),” “60M
(Minutes).”
DEMO
(Demonstration)
Activates the demonstration: “ON,”
“OFF.”