Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your own equalizer settings.

1Select a source, then press the select button repeatedly to select “EQ3.”

2Rotate the volume control dial to select “CUSTOM.”

3Press the select button repeatedly until “LOW,” “MID” or “HI” appears.

4Rotate the volume control dial to adjust the selected item.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer curve.

To restore the factory-set equalizer curve, press and hold the select button before the setting is complete.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1Press and hold the select button.

The setup display appears.

2Press the select button repeatedly until the desired item appears.

3Rotate the volume control dial to select the setting (example “ON” or “OFF”).

4Press and hold the select button.

The setup is complete and the display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

The following items can be set (follow the page reference for details):

“z” indicates the default settings.

CLOCK-ADJ(Clock Adjust) (page 6)

CT*1 (Clock Time)

To set “CT-ON” or “CT-OFF” (z) (page 12, 13).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*2(AUX Audio)

To turn the AUX source display “AUX-A-ON” (z) or “AUX-A-OFF” (page 17).

A.OFF (Auto Off)

To shut off automatically after a desired time when the unit is turned off,

–“A.OFF-NO” (z), “A.OFF-30S (Seconds),” “A.OFF-30M (Minutes)” or “A.OFF-60M (Minutes).”

REAR/SUB*2

To switch the audio output.

–“REAR-OUT” (z): to output to a power amplifier.

–“SUB-OUT”: to output to a subwoofer.

DEMO (Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

DIMMER

To change the brightness of the display.

–“DIMMER-AT” (z): to dim the display automatically when you turn lights on.

–“DIMMER-OFF”: to deactivate the dimmer.

–“DIMMER-ON”: to dim the display.

CONTRAST

To adjust the contrast of the display.

The contrast level is adjustable in 7 steps.

ILLUMI (Illumination)

To change the illumination color: “ILLUMI-1” (z) or “ILLUMI-2.”

16