Tape – Recording
Recording your favorite CD tracks on a tape— CD-Tape Synchro Recording
You can record a whole CD on a tape. You can use TYPE I (normal) tape.
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Load a CD you want to record.
When you want to record an album from an MP3 disc, be sure to press PLAY MODE to select ALBM, then use ALBUM +/– to select the desired album before proceeding.
3 Press CD SYNCHRO.
“SYNC”, “REC” and “N” (or “n”) appears. The tape deck stands by for recording and the CD player pauses for playback.
4 Press DIRECTION on the unit repeatedly until g appears to record on one side or h (or j) to record on both sides.
5 Press TAPE nN repeatedly to select recording side.
If you select both sides recording or front side recording, press TAPE nN until “N” appears. If you record on the reverse side, press TAPE nN again until “n” appears.
6 Press TAPE X.
Recording starts.
When the recording is completed, the CD player and the tape deck stop automatically.
To stop recording
Press TAPE x.
To record a disc by specifying track order
You can record only your favorite CD tracks using Program Play. Between steps 2 and 3, perform steps 1 to 5 of “Creating your own program” (page 10).
Tip
If you select both sides recording and the tape reaches the end of the front side