Analogue AUDIO OUT connector

The pin assignment for the audio out connector is as follows:

pin

Audio Signal

 

 

1

R signal

2

ground

3

ground

4

L signal

IDE INTERFACE connector

1Firmly insert one end of the interface cable into the INTERFACE CONNECTOR.

Pin 1

INTERFACE

CONNECTOR

INTERFACE cable

2Attach the other end of the cable to the PRIMARY or SECONDARY IDE interface connectors on the computers main- board.

Refer to your computers user manual for more information on where these connectors will be located.

Closing the Computer

Refer to your computers user manual for instructions on how to close the computer.

Using Discs

Storing Discs

•Do not store the disc in a location subject to:

–high humidity

–high temperature

–excessive dust

–direct sunlight

Care of Discs

•Hold the disc by its edge. Do not touch the surface.

•Data cannot be recorded if the recording surface is contaminated.

12

13