BConnecting your CD player

Connecting a stereo system

You can listen to CDs through a stereo system and record CDs on a cassette tape and a MiniDisc. For details, see the instruction manual that comes with the connected device.

Be sure to turn off all connected devices before making connections.

to LINE OUT (OPTICAL)

Optical

Connecting

cord

digital

Left (white)

connecting

cord

Right (red)

 

MiniDisc

Stereo system,

cassette recorder,

recorder, DAT

radio cassette

deck, etc.

recorder, etc.

Notes

Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers.

Use the AC power adaptor for recording. If you use the rechargeable batteries or dry batteries as a power source, batteries may become completely depleted during recording.

Adjust the volume properly on the connected device so that the sound will not be distorted.

When using the connecting cord

You cannot adjust the volume of the headphones/earphones on the CD player or the remote control.

If the sound is distorted, connect the device to the i/REMOTE jack.

When using the optical digital connecting cord

To record a CD on a MiniDisc, DAT, etc., make sure that the CD player is in pause before operating the recording procedures.

About the SOUND function when using the connecting cord

See the following table for valid functions according to the types of connecting cord:

 

SOUND

Connecting cord

No

 

 

Optical digital connecting cord

Yes*

 

 

*Functions only on the output sound from the i/REMOTE jack; does not function on the output sound from the LINE OUT (OPTICAL) jack.

16