13 Press X/x to select the surround speaker distance from the listening position, then press .

Quick Setup is finished. All connections and setup operations are complete.To quit the Quick SetupPress DISPLAY in any Step.

Tip

•If you change the position of the speakers, reset the speaker settings. See “Getting Optimal Surround Sound for a Room” (page 57).

•If you want to change any of the settings, see “Using the Setup Display” (page 59).

To recall the Quick Setup display1Press DISPLAY when the system is in stop mode.The Control Menu display appears.2Press X/x to select [SETUP], then press .The options for [SETUP] appear.

1 2 ( 2 7 )

1 8 ( 3 4 )

DVD VIDEO

T

0 : 0 0 : 0 2

 

QUICK

QUICK

CUSTOM

RESET

3Press X/x to select [QUICK], then press .The Quick Setup display appears.
Selecting the output method for video signals

Selects the output method for video signals from the EURO AV T OUTPUT (TO TV) jack on the rear panel of the unit.

FUNCTION

VIDEO

FORMAT

1 Press FUNCTION repeatedly to select “DVD.”2 Press VIDEO FORMAT.Each time you press VIDEO FORMAT, the display changes as follows:tLINE VIDEO rLINE RGB•“LINE VIDEO”: outputs video signals.•“LINE RGB”: outputs RGB signals.

Note

•If your TV does not accept RGB signals, no picture appears on the TV screen even if you select “LINE RGB.” Refer to the operating instructions supplied with your TV.

– BASIC – Started Getting

15GB