Types of trouble and how to correct trouble

Others

Symptom

Cause and/or Corrective Actions

The title is not recorded.

• The tape has no cassette memory.

 

c Use a tape with cassette memory (p. 123).

 

• The cassette memory is full.

 

c Erase unnecessary title (p. 126).

 

• The tape is set to prevent accidental erasure.

 

c Slide the write-protect tab so that red portion is not visible

 

(p. 26).

 

• The tape has a blank portion in the recorded portion.

 

c Superimpose the title to the recorded position (p. 123).

The cassette label is not recorded.

• The tape has no cassette memory.

 

c Use a tape with cassette memory (p. 129).

 

• The cassette memory is full.

 

c Erase some titles (p. 126).

 

• The tape is set to prevent accidental erasure.

 

c Slide the write-protect tab so that red portion is not visible

 

(p. 26).

Digital program editing does not function.

•The input selector on the VCR is not set correctly.

cSet the selector correctly, and check the connection between the VCR and your camcorder (p. 95, 97).

•The camcorder is connected to DV equipment of other than Sony using the i.LINK cable (DV connecting cable).

cSet it to IR (p. 101).

•Setting programme on a blank portion of the tape is attempted.

cSet the programme again on a recorded portion (p. 108).

•The syncronicity of your camcorder and the VCR is not adjusted.

cAdjust the syncronicity of the VCR (p. 106).

•The IR SETUP code is incorrect.

cSet the correct code (p. 102).

The Remote Commander supplied with your camcorder does not work.

•COMMANDER is set to OFF in the menu settings. c Set it to ON (p. 132).

•Something is blocking the infrared rays.

cRemove the obstacle.

•The batteries are inserted in the battery holder with the + – polarities incorrectly matching the + – marks.

cInsert the batteries with the correct polarity (p. 187).

•The batteries are dead.

cInsert new ones (p. 187).

неисправностей устранение и Поиск Troubleshooting

The picture from a TV or VCR does • DISPLAY is set to V-OUT/LCD in the menu settings.

not appear even when yourc Set it to LCD (p. 132). camcorder is connected to outputs on

the TV or VCR.

The melody or beep sounds for 5 • Moisture condensation has occurred.

seconds.c Remove the cassette and leave your camcorder for at least 1 hour to acclimatize (p. 169).

•Some troubles have occurred in your camcorder.

cRemove the cassette and insert it again, then operate your camcorder.

147