Setup 2 | For details on the operation 1 page 56 |
2
The default settings are marked with .
File Number
Selects the method used to assign file numbers to images.
| Series | Assigns numbers to files in sequence even if the recording |
|
| folder or the “Memory Stick Duo” is changed. (When the |
|
| replaced “Memory Stick Duo” contains a file with a number |
|
| higher than the last assigned number, a number one higher |
|
| than the largest number is assigned.) |
|
|
|
| Reset | Starts from 0001 each time the folder is changed. (When the |
|
| recording folder contains a file, a number one higher than the |
|
| largest number is assigned.) |
|
|
|
USB Connect
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the USB cable.
| PictBridge | Connects the camera to a PictBridge compliant printer |
|
| |
|
|
|
| PTP | When [PTP] (Picture Transfer Protocol) is set and the camera |
|
| is connected to a computer, the images in the recording folder |
|
| on the camera are copied to the computer. (Compatible with |
|
| Windows XP and Mac OS X.) |
|
|
|
| Mass Storage | Establishes a Mass Storage connection between the camera |
|
| and a computer or other USB device (page 73). |
|
|
|
| Auto | The camera recognizes automatically and sets up |
|
| communication with a computer or PictBridge compliant |
|
| |
|
| • If the camera and a PictBridge compliant printer cannot be |
|
| connected when set to [Auto], change the setting to |
|
| [PictBridge]. |
|
| • If the camera and a computer or other USB device cannot be |
|
| connected when set to [Auto], change the setting to [Mass |
|
| Storage]. |
|
|
|
screen Setup the Using
67