Printing images directly using a PictBridge compliant printer
Even if you do not have a computer, you can print images shot using your camera by connecting the camera directly to a PictBridge compliant printer.
•“PictBridge” is based on the CIPA standard. (CIPA: Camera & Imaging Products Association)
Stage 1: Preparing the camera
Prepare the camera to connect it to the printer via a USB connection. When connecting the camera to a printer that is recognized when [USB Connect] is set to [Auto], Stage 1 is unnecessary.
Index button
In
You can print a single image on a printing sheet.
In index mode
You can print several images at a reduced size on a printing sheet. You can print a set of either the same images (1) or different images (2).
12
•An index print function may not be provided depending on the printer.
•The quantity of images that can be printed as an index image differ depending on the printer.
•You cannot print movies.
•If the 
indicator flashes on the screen of the camera for about five seconds (error notification), check the connected printer.
MENU button
Control Button
•It is recommended to use fully charged Nickel- Metal Hydride batteries or an AC Adaptor (not supplied) to prevent the power from turning off partway through printing.
1 Press MENU to display the menu.
2 Press B on the control button to select 
(Setup).
3 Select [ 2 ] (Setup2) with V, then select [USB Connect] with v/V/B.
4 Select [PictBridge] with B/v, then press z.
The USB mode is set.
86