The image does not appear on the TV screen.

•Check [Video Out] to see if the video output signal of your camera is set to the color system of your TV (page 54).

•Check whether the connection is correct (page 76).

•The switch on the cable for multi-use terminal is set to “CAMERA”. Set to “TV” (page 76).

The image does not appear on the screen when a USB connection is made.

•The switch on the cable for multi-use terminal is set to “TV”. Disconnect the cable for multi- use terminal or set the switch to “CAMERA” (page 59).

Deleting/Editing images

Your camera cannot delete an image.

•Cancel the protection (page 39).

•You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position (page 93).

You have deleted an image by mistake.

•Once you have deleted an image, you cannot restore it. We recommend that you protect images (page 38), or use the “Memory Stick Duo” with the write-protect switch and set the switch to the LOCK position (page 93) to prevent accidental erasure.

The resizing function does not work.

•You cannot resize movies and Multi Burst images.

You cannot display a DPOF (Print order) mark.

•You cannot display DPOF (Print order) marks on movies.

You cannot cut a movie.

•The movie is not long enough to cut (shorter than about two seconds).

•Cancel the protection (page 39).

•Still images cannot be cut.

Troubleshooting

83