3 Set the mode switch to , then turn on the camera and the computer.

•Set the switch on the supplied cable for multi-use terminal to “CAMERA”.

CAMERA TV

DISP SEL

Stage 3: Connecting the camera and your computer

2To the multi connector

1 To a USB connector

Cable for multiuse terminal (supplied)

•With Windows XP, the AutoPlay wizard appears on the desktop.

“USB Mode Mass Storage” appears on the screen of the camera.

USB Mode

Mass Storage

Access indicators*

Memory Stick

Switch on MENU

When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera.

Wait for a while.

*During communication, the access indicators turn red. Do not operate the computer until the indicators turn white.

•If “USB Mode Mass Storage” does not appear, set [USB Connect] to [Mass Storage] (page 56).

Stage 4-A: Copying images to a computer

•For Windows 98/98SE/2000/Me, follow the procedure explained in “Stage 4-B: Copying images to a Computer” on page 64.

•For Windows XP, when the wizard screen does not appear automatically, follow the procedure explained in “Stage 4-B: Copying images to a Computer” on page 64.

This section describes an example of copying images to a “My Documents” folder.

62