Printing images directly using a PictBridge compliant printer

Even if you do not have a computer, you can print images shot using your camera by connecting the camera directly to a PictBridge compliant printer.

•“PictBridge” is based on the CIPA standard. (CIPA: Camera & Imaging Products Association)

Stage 1: Preparing the camera

Prepare the camera to connect it to the printer with the cable for multi-use terminal. When connecting the camera to a printer that is recognized when [USB Connect] is set to [Auto], Stage 1 is unnecessary.

In single-image mode

You can print a single image on a printing sheet.

In index mode

You can print several images at a reduced size on a printing sheet. You can print a set of either the same images (1) or different images (2).

12

•An index print function may not be provided depending on the printer.

•The quantity of images that can be printed as an index image differ depending on the printer.

•You cannot print movies.

•If the indicator flashes on the screen of the camera for about five seconds (error notification), check the connected printer.

Index button

MENU button

Control Button

•It is recommended to use a fully charged battery pack or an AC Adaptor (not supplied) to prevent the power from turning off partway through printing.

1 Press MENU to display the menu.

2 Press B on the control button to select (Setup).

3 Select [ 2 ] (Setup2) with V, then select [USB Connect] with v/V/B.

4 Select [PictBridge] with B/v, then press z.

The USB mode is set.

74