Enable printer to connect

•[USB Connect] is set to [PictBridge], however the camera is connected to a non-PictBridge compliant device.

Check the device.

•The connection is not established. Disconnect and connect the cable for multi-use terminal again. If an error message is indicated on the printer, refer to the operating instructions supplied with the printer.

Connect to PictBridge device

•You tried to print images before the printer connection was established. Connect to a PictBridge compliant printer.

No printable image

•You tried to execute [DPOF image] without placing a DPOF (Print order) mark on the image(s).

•You tried to execute [All In This Folder] while a folder that holds only movies was selected. You cannot print movies.

Printer busy

Paper error

No Paper

Ink error

Low Ink

No Ink

•Check the printer.

Printer error

•Check the printer.

•Check if the image you want to print is corrupted.

•The data transmission to the printer may not be completed yet. Do not disconnect the cable for multi-use terminal.

Processing

•The printer is canceling the current print job. You cannot print until it is finished. This may take time, depending on the printer.

No image for Slide Show

•The selected folder does not contain a file that can be played in a Slide Show with music.

Music Error

•Delete the Music file, or replace it with a normal Music file.

•Execute [Format Music], then download a new Music files.

Format Music Error

•Execute [Format Music].

96