Using the shooting function
85
With an external wireless flash (sold separately), you can shoot with the
flash without a cord when the external flash is not attached to the camera.
By changing the position of the flash, you can shoot an image with a three
dimensional feel by highlighting the contrast of light and shadow on the
subject.
For the actual steps of shooting, refer to the operating instructions of the
flash.
Notes
•The camera cannot perform a p re-flash test of the wireless flash. Confirm that the
flash fires properly by releasing the shutter.
•The camera cannot carry out the wi reless lighting ratio control.
•Turn off the wireless flash m ode after wireless flash shooting. If the built-in flash is
used while the wireless flash mode is still active, inaccurate flash exposures will
result.
•Change the chann el of the external flash when another photographer is using a
wireless flash nearby and his/her built-in flash light causes your external flash to fire.
To change the channel of the external flash, refer to the operating instructions
supplied with it.
Performing wireless flash shooting
1Attach the wireless flash to the Auto-lock Accessory Shoe and
turn both the camera and the flash on.
2 on the control button t
(Wireless)
3Remove the wireless flash from the Auto-lock Accessory Shoe.