Connections
Tips
Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below.
Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
For better sound reproduction, connect the player’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See “Connecting to Optional Equipment” on page 11.
–Make sure the DVD Player is connected directly to the TV. Tune the TV to the correct video input channel.
–Do not connect the DVD Player’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
–Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection system.
Connecting to a TV
Make one of the following connections, depending on the capabilities of your existing equipment.
Video connection
1the video in jack on the TV using the video cable (V) (not supplied).Connect the VIDEO OUT jack on the DVD Player to
2the DVD Player to the audio left/right in jacks on the TV (A) using the audio cables (not supplied).Connect the Left and Right AUDIO OUT jacks of
1to the
2the DVD Player to the audio left/right in jacks on the TV (A) using the audio cables (not supplied).Connect the Left and Right AUDIO OUT jacks of
SCART connection
Connect the TO TV scart jack on the DVD Player to the corresponding in jacks on the TV using the scart cable
(T)(not supplied).
Rear of TV
AUDIO INPUT | VIDEO | SCART INPUT | ||
INPUT |
|
| INPUT |
|
| R | L |
|
|
S A V
T
DIGITAL OUT | LINE OUT |
PCM/DTS/MPEG/ |
|
DOLBY DIGITAL COAXIAL |
|
R AUDIO L | VIDEO |
OPTICAL S VIDEO |
|
OUT |
|
Rear of DVD player
* Cable S.A.V.T. (not supplied)
10