Sony DVW-709WS/709WSP manual Installation Reel Table Cleaning, Brake Band Assembly Installation

(3)Remove the S soft bracket and the tension spring from the band base.

Installation

3. S Reel Table Cleaning

Clean the contact surface with the brake band of the S reel table using a cleaning cloth moistened with cleaning fluid.

4. Brake Band Assembly Installation

(1)Attach the S soft bracket and the tension spring to the band base of the new brake band assembly.

(2)Put the two pins on the chassis into the two holes of the band base of the new brake band assembly and temporarily attach together with the base holder using the torque screwdriver bit (for M2).

(3)Put the other hook of the brake band assembly in the shaft of the tension regulator arm.

n

Take care not to scratch the brake band assembly because of bending.

(4) Attach the stop washer while supporting the arm by finger.

n

When attaching, do not press the excessive force to the tension regulator arm.

DVW-790WS/709WS/707

4-2. Parts Replacement

Tension spring

S soft brake

Band base

4-39

DVW-790WSP/709WSP/707P P2V1