16 GB
Remote Control
You cannot use the S VIDEO button, button, the OPTION1 button and the OPTION2 button on this display.

Button Description

• The 5 button and button have a tactile dot. Use the tact ile dot as a reference when operating the display.
• Insert two size AA (R6) batteries (supplied) by matching the 3 and # on the batteries to the diagram inside the remote control’s
battery compartment.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type re commended by the
manufacturer. When you dispose of the battery, you must obey the law in the relative area or country.
Note
1ON (power-on) button
Press to turn the display on.
Operate when the main power switch on the rear of the display is
“ON.”
2DVI button
Press to select the signal input to the DVI port.
3HDMI button
Press to select the signal input to the HDMI IN connector from a
piece of video equipment.
4VIDEO button
Press to switch between the input s ignals from VIDEO IN and
COMPONENT IN
5PICTURE button
Selects “Picture Mode”. Each press toggles between “Vivid”,
“Standard”, “Custom”, and “Conference”.
6F/f/G/g/ buttons
Press the F/f/G/g buttons to move the selected menu item and set
the values.
Pressing sets the selected menu or setting items.
7 button
Press to change the aspect ratio (page 18).
8MENU button
Press to show the menu on the screen. Press again to hide the menu
(page22).
Notes
Caution

,

Push and slide to open