Versatile System Components
MSU-900/950Master Setup Unit
The MSU-900/950 Master Setup Unit is a central control panel used for the adjustment of camera parameters in a multi-camera system. The MSU- 900/950 unit is connected to each camera control unit in the system via the CNU-700 Command Network Unit or an Ethernet network hub.
>Central control of camera parameters for the entire camera system (up to 24 cameras)
>Picture and waveform monitor switching
>Precise picture adjustment
>Built-in 6.5-inch1type LCD display for clear viewing of adjustment parameters during operation
>Memory Stick slot for storing/recalling files
>Built-in Ethernet interface (10Base-T/100Base-TX)
1 Viewable area measured diagonally
RCP Series Remote Control Panel
Four types of Sony Remote Control Panel-theRCP-750, RCP-751, RCP-920, andRCP-921-areavailable, providing a wide range of camera parameter controls. The RCP-750/751 offers in-depth menu-based controls, while the RCP-920/ 921 allows direct and quick control of various parameters usingdedicatedbuttonsonthepanel. The RCP-750 and 751 are connected to the CCU via dedicated cabling. The RCP-920 and 921 can also be connected and powered directly from a (POE) network hub.
RCP-750 | RCP-751 | RCP-920 | RCP-921 |
CNU-700Camera Command Network Unit
TheCNU-700CameraCommandNetwork Unit allows communication between all the units in the system, and provides the ability to assign CCUs, MSUs, RCPs, and HDC-1000 Series camera heads. ARISC-basedmicroprocessorsystemprovides high-speed transfer of command signalstotheHDCU-1000/HDCU-1500Camera Control Unit for rapid response and reliable control.
One CNU-700 unit can control six came- ras, butcanbeexpandedtocontrolupto 12 cameras when fitted with an optional BKP-7930 Expansion Board.
Several CNU-700 units can be connected to the camera control network in a large system. The CNU-700 supports RCP assignment.