23
Setting the Camera Outputs
To output as VBS
Constantly outputting a return signal
• When a camera control unit is connected, one of the
signals being supplied to the camera control unit can be
selected and output it from the camera.
• The last selected return signal is output.
• The same textual information as those displayed o n the
viewfinder can be added to the output signal by setting
CHARACTER to “ON” on the <SDI-2 OUT> or <TEST
OUT> page.
To output as HD-SDI
To output as SD-SDI
To output as VBS
Outputting the same image as that on the viewfinder
• With HD-SDI, you can obtain a signal that includes the
same information as that being displayed on the
viewfinder according to the settings of the VF
MARKER, CHARACTER,VF DETAIL, ZEBRA, etc.
The ON/OFF or other settings for adding information are
common to those for the viewfinder. The output is
synchronized with switching among Y, R, G, and B or
switching to a return signal.
• With SD-SDI or VBS, the output is synchronized only
with switching between a return signal and the camera
image. It does not correspond to switching among Y, R,
G, and B. Information other than CHARACTER (such as
VF MARKER,VF DETAIL, ZEBRA) cannot be added
to the output.
With the settings for outputting the same image as that on
the viewfinder, the output will be obtained in 1080i, even
if the format setting is 720P.
To output as HD-SDI
To output as SD-SDI
To output as VBS
Outputting via Dual Link
The SDI-1 output is assigned to Link A and SDI-2 output
is to Link B.
This function cannot be used when a camera control unit is
connected.
To output in 1080/59.94P or 1080/50P
Menu page Item Setting
<POWER SAVE> DOWN CONVERTER ACTIVE
<DOWN CONVERTER> OUTPUT SIGNAL MAIN
<TEST OUT> OUTPUT VBS
Menu page Item Setting
<POWER SAVE> SDI-2 OUT ACTIVE
<SDI-2 OUT> OUTPUT RET
Menu page Item Setting
<POWER SAVE> SDI-2 OUT ACTIVE
DOWN CONVERTER ACTIVE
<DOWN CONVERTER> OUTPUT SIGNAL RET
<SDI-2 OUT> OUTPUT SD-SDI
Menu page Item Setting
<POWER SAVE> DOWN CONVERTER ACTIVE
<DOWN CONVERTER> OUTPUT SIGNAL RET
<TEST OUT> OUTPUT VBS
Note
Menu page Item Setting
<POWER SAVE> SDI-2 OUT ACTIVE
<SDI-2 OUT> OUTPUT VF
Menu page Item Setting
<POWER SAVE> SDI-2 OUT ACTIVE
DOWN CONVERTER ACTIVE
<DOWN CONVERTER> OUTPUT SIGNAL VF
<SDI-2 OUT> OUTPUT SD-SDI
Menu page Item Setting
<POWER SAVE> DOWN CONVERTER ACTIVE
<DOWN CONVERTER> OUTPUT SIGNAL VF
<TEST OUT> OUTPUT VBS
Note
Menu page Item Setting
<OUTPUT FORMAT> ACTIVE LINE 1080
(Format) 59.94P or
50P
<POWER SAVE> SDI-2 OUT ACTIVE
<SDI-2 OUT> OUTPUT LINK-B