42 Menu List
<AUTO IRIS> M05 AUTO IRIS OFF ON, OFF, (ON), (OFF) Settings in ( ): When a remote
control unit/panel or a CCU
is not connected (cannot be
changed)
WINDOW 1 1, 2, 3, 4, 5, 6 Select the auto iris windows:
The shaded parts indicate the
area where light detection
occurs.
OVERRIDE - - –99 to 99, - - To set the override to
temporarily change the
reference value for brightness
of the automatic iris level in the
range of ±2 steps:
–99: two steps to fully closed
iris
99: two steps to fully open iris
- - : OFF
The setting returns to - - when
the power is turned off.
IRIS LEVEL 0 –99 to 99 ±4 steps
APL RATIO 65 –99 to 99
IRIS GAIN 0 –99 to 99
IRIS CLOSE OFF ON, OFF
<MIC GAIN> M06
(U14)
MIC1 60 dB 20, 30, 40, 50, 60 dB
MIC2 60 dB 20, 30, 40, 50, 60 dB
<UP TALLY> M07
(U20)
TALLY BRIGHTNESS 50 0 to 100
NUMBER BRIGHTNESS 50 0 to 100
CAMERA NUMBER - - - -, 1 to 96
NUMBER DISPLAY AUTO ON, OFF, AUTO AUTO: to correspond to the UP
TALLY switch setting
<CALL/TALLY> M08 CCU CALL ON ON, OFF Invalid with CCU connected
CAM CALL OFF ON, OFF Invalid with CCU connected
<OUTPUT FORMAT> M09
(U15)
CURRENT 1080-59.94i Displays the current format.
ACTIVE LINE 1080 1080, 720 The selectable frame settings
are displayed for the selected
ACTIVE LINE .
(not displayed with CCU
connected)
JN3 model: 59.94i
CED model: 50i
1080: 24PsF, 59.94i,
29.97PsF, 23.98PsF,
59.94P, 50i, 25PsF, 50P
720: 59.94P, 50P
<DOWN
CONVERTER>
M10
(U18)
OUTPUT SIGNAL MAIN MAIN, RET, VF
ASPECT SQ SQ, EC
Menu page No. Item⁄Default Settings Remarks
123
456