61
US
Additional information
Incompatible memory card is inserted (p. 21).
The memory card is write-protected.Access to the memory card was restricted on another device.
The camcorder is unsteady. Hold the camcorder
steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
The recording media is full. Delete unnecessary
images (p. 35).
Photos cannot be recorded during processing.
Wait for a while, then record.
When [ REC Mode] is set to [Highest
Quality ] or [60p Quality ], you cannot
capture photos while recording movies.
Recording time of movies/number of recordable photos
“HD” stands for high definition image
quality, and “STD” stands for standard
image quality.

Expected time of recording and

playback with each battery pack

Recording time

Approximate time available when you use a
fully charged battery pack.
(unit: minute)
Battery pack Continuous
recording time
Typical recording
time
Image quality HD STD HD STD
NP-FV50
(supplied)
150 165 75 80
NP-FV70 315 345 155 170
NP-FV100 625 680 310 340
Each recording time is measured when the
camcorder is recording high definition image
quality (HD) movies with [ REC Mode] set
to [Standard ].
Typical recording time shows the time when
you repeat recording start/stop, switching the
MODE lamp, and zooming.
Times measured when using the camcorder at
25 C (77 °F). 10 C to 30 C (50 °F to 86 °F) is
recommended.
The recording and playback time will be
shorter when you use your camcorder in low
temperatures.
The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.