37GB
Tuner Operations
1Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the subwoofer.
2Press and hold TUNING +/–
until the auto scanning starts.
Press TUNING + to scan from low to
high frequency; press TUNING – to scan
from high to low frequency.
The system stops scanning whenever a
station is received. To stop the Auto
Tuning manually, press TUNING +/–.
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
1Press MENU/HOME.
2Press V/v repeatedly until “FM
MODE” appears, then press
or b.
3Press V/v repeatedly until
“MONO” appears, then press
.
•S TEREO: Stereo reception.
•M ONO: Monaural reception.
The initial setting is “STEREO”.
4Press MENU/HOME.
Tip
To improve reception, reorient the supplied
antennas (aerials).
Enter the frequency of a station directly by
using the numeric buttons.
1Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the subwoofer.
2Press D.TUNING.
3Press and hold SHIFT, then
press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 t 0 t 2 t 5 t 0
Example 2: AM 1,350 kHz
Select 1 t 3 t 5 t 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
4Press and hold SHIFT, then
press ENTER.
If a wrong frequency is entered
“FM ---.--” or “AM ----” appears and then the
display returns to the current frequency.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.