Sony HT-AF5, HT-AS5 1, 2, 3, 4, 5, 6, 7, 8, 9

54GB

To perform pairing

1Place the S-AIR sub unit that

you want to pair near the S-AIR

main unit.

Note

Remove headphones from the surround

amplifier (if connected).

2Match the IDs of the S-AIR main

unit and the S-AIR sub unit.

• To set the ID of the S-AIR main unit,

see “To set the ID of the S-AIR main

unit” (page 52).

• To set the ID of the S-AIR sub unit,

refer to the operating instructions

supplied with the S-AIR sub unit.

3Press AMP MENU.

“LEVEL” appears on the display.

4Press V/v repeatedly until

“S-AIR SET” appears, then

press or b.

5Press V/v repeatedly until

“PAIRING” appears, then press

or b.

6Press V/v repeatedly until the

setting you want appears,

then press .

• START: The S-AIR main unit starts

pairing.

• CONDITION: You can check the

current ID. When the pairing setting is

timed out, “NO PAIRING” appears on

the display.

7Start pairing of the S-AIR sub

unit.

xFor the surround amplifier

Refer to the operating instructions

supplied with surround amplifier.

xFor the S-AIR receiver

Refer to the operating instructions

supplied with S-AIR receiver.

8Pairing completed.

“COMPLETE” appears on the display.

9Press AMP MENU.

The AMP MENU turns off.

Note

Perform the pairing within several minutes after you

select “START” in step 6. Otherwise, the pairing is

canceled automatically and “INCOMPLETE”

appears on the display.

To cancel pairing

Reset the ID of the S-AIR main unit. For

details, see “To set the ID of the S-AIR main

unit” (page 52). You can set the same ID as

before.

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in Europe WARNING Notice for the customer in the countries applying EU Directives About This Manual On copyrights About area codes Table of Contents Getting Started Playback Enjoying Surround Sound Tuner Operations Unpacking Be sure that you have the following items in your package. HT-AF5 only HT-AS5 only Inserting batteries into the remote Description and location of parts Front view 54 Subwoofer 1 About the indicators on the display 1 6578423 9q;qa Rear panel AS-AIR BAUDIO INPUT section CANTENNA section DDIGITAL INPUT/OUTPUT section Remote commander TV (M) button Basic operations Tuner operations DMPORT operations 1 (TV, BD, DVD or SAT/CATV) (U) to select the component you want to operate. The component assigned to the selected input button becomes operable. 2 press the corresponding button for the operation. c*/C To control the DVD player/recorder, Blu-ray Disc player/recorder To control the HDD/DVD COMBO To control the SAT/CATV 1: Installing the speakers HT-AF5 only HT-AS5 only Getting Started To disassemble the front speakers of HT-AF5 (SS-TSB104) 1 2 (pre-installed) at the rear of the speaker. Installing the speakers on the speaker stand Installing the speakers on the wall 3 4 5 6 7 1 that are suitable for the hook on the back of each speaker. See the illustrations below. 2 The screws should protrude 8 mm to 10 mm. 3 screws. D 2: Connecting the speakers E 3: Connecting the audio/ video components Connecting TV, DVD recorder and Blu-ray Disc player Notes on connecting cables Notes on HDMI connections * AA AHDMI cable (not supplied) Connecting satellite tuner or cable television tuner AHDMI cable (not supplied) BOptical digital cord (not supplied) CVideo cord (not supplied) BA Notes on connecting DIGITAL MEDIA PORT adapter Connecting other components BA AAudio cord (not supplied) BCoaxial digital cord (not supplied) CVideo cord (not supplied) 4: Connecting the antennas (aerials) 5: Preparing the system 1 2 seconds until CLEARED appears. Connecting the AC power cord (mains lead) Performing initial setup operations 6: Calibrating the appropriate settings automatically (Auto Calibration) 1 microphone to the AUTO CAL MIC jack. 2 Performing Auto Calibration Getting Started 1 result. When the measurement ends, a beep sounds and the measurement result appears on the display. 2 the item, then press . result When you select DIST INFO or LEVEL INFO When you have finished A.CAL MENU appears, then A.CAL CLEAR appears, then Selecting a component 1 a component. You can also use INPUT SELECTOR on the subwoofer. The selected input appears on the display. 2 Enjoying sound/images from the components connected to the system 1 2 3 4 1 2 Page Selecting the sound field Types of sound field available Press SOUND FIELD +/ repeatedly to select the sound field you want. Enjoying Surround Sound Enjoying Surround Sound Tip Enjoying the sound at low volume (NIGHT MODE) 2 AUDIO appears, then press or b. 3 1 2 If an FM program is noisy 1 2 3 1 2 3 4 If a wrong frequency is entered If you cannot tune in a station Presetting radio stations 1 2 3 4 1 2 7 3 4 5 Using the Radio Data System (RDS) Displaying RDS information While receiving an RDS station, press DISPLAY repeatedly. Receiving RDS broadcasts What is BRAVIA Sync? The Control for HDMI function will not operate correctly in the following cases: Preparing for the BRAVIA Sync When your TV is compatible with the Control for HDMI-Easy Setting function 1 When your TV is not compatible with the Control for HDMI-Easy Setting function 1 2 3 4 2 SET HDMI appears, then press 3 CTRL HDMI appears, then press 4 Enjoying the TV sound from the systems speakers Using the Volume Limit function (System Audio Control) 2 SET HDMI appears, then Turning off the system with the TV (System Power Off) Press TV and TV ?/1 at the same time. Using the power saving function (HDMI Signal Pass Through) 1 2 3 Enjoying the TV sound via an HDMI connection (Audio Return Channel (ARC)) 1 2 3 Enjoying optimum sound field for the selected scene (Scene Select) Enjoying movies with the optimum sound field (Theatre Mode) About S-AIR products S-AIR Operations Setting up an S-AIR product Page To set the ID of the S-AIR main unit 2 3 4 5 6 To use multiple S-AIR main units xBefore pairing xAfter pairing Pairing the S-AIR main unit with a specific S-AIR sub unit (Pairing operation) 1 2 3 4 5 Enjoying the systems sound in another room 1 to match the ID of the S-AIR main unit. 2 3 6 the S-AIR product. 7 receiver. To control the system from the S-AIR receiver Page Changing the channel for better sound transmission 2 S-AIR SET appears, then 3 RF CHANGE appears, then Enjoying the S-AIR receiver while the S-AIR main unit is in standby mode 2 S-AIR SET appears, then 3 S-AIR STBY appears, then Changing the input button assignments 1 2 3 Advance Settings Settings and adjustments using the amplifier menu 2 menu you want appears, then press or b. 3 parameter you want to adjust appears, then press or b. Overview of the menus LEVEL menu When a test tone is not output from the speakers xAUDIO DRC xBASS xTREBLE To adjust the front speakers tone level 1 TONE menu AUDIO menu SYSTEM menu SP SETUP menu Page Glossary xDeep Colour xDigital Cinema Sound (DCS) xDolby Digital xDolby Pro Logic II xS-AIR (Sony Audio Interactive Radio frequency) xS-Master xSampling frequency xTSP (Time Stretched Pulse) xx.v.Colour Precautions On safety On power sources On placement On operation If colour irregularity is observed... If colour irregularity is observed again... If howling occurs On cleaning On S-AIR function Troubleshooting Audio Video HDMI S-AIR function Tuner Remote commander Others Error messages If you are unable to remedy the problem using the troubleshooting guide If the problem persist Specifications AUDIO POWER SPECIFICATIONS Amplifier section HDMI Video HDMI Video (3D) Additional Information Speaker section HT-AS5 only Design and specifications are subject to change without notice. Index Numerics A B C