36GB
Settings for the speaker
(SP SETUP menu)
You can use the SP SETUP menu to set the
distance of the speakers connected to this
receiver.
Select “SP SETUP” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 32) and
“Overview of the menus” (page 33).
SP SETUP menu parameters
xCNT SP (Center speaker)
Lets you select the center speaker.
xSUR SP (Surround speakers)
Lets you select the surround speakers.
xFL DIST (Front left speaker
distance)
xFR DIST (Front right speaker
distance)
Lets you set the distance from your listening
position to the front speaker (A). If both front
speakers are not placed an equal distance from
your listening position, set the distance to the
closest speaker.
xCNT DIST (Center speaker
distance)
Lets you set the distance from your listening
position to the center speaker.
xSR DIST (Surround right speaker
distance)
xSL DIST (Surround left speaker
distance)
Lets you set the distance from your listening
position to the surround speakers.
xSW DIST (Subwoofer distance)
Lets you set the distance from your listening
position to the subwoofer.
Notes
• “CNT DIST” does not appear when you set
“CNT N” in the “SP SETUP” setting.
• “SR DIST” and “SL DIST” do not appear when
you set “SUR N” in the “SP SETUP” setting.
Tip
When the Auto Calibration result is saved, you can
adjust the speakers distance in 1 cm steps. If the
Auto Calibration result is not saved, you can adjust
the speakers distance in 10 cm steps.
30˚30˚
100˚-120˚100˚-120˚
A A