11US
IAMP MENU
Displays the menu to operate the receiver.
J
Press V/v/B /b to select the settings, then press
to enter/confirm the selection.
MTUNING +/–
Scans a station (page 30).
PRESET +/–
Selects preset stations (page 31).
NSOUND FIELD +2)/–
Selects a sound field (page 32).
OSHIFT
Changes the remote control button function to
activate the buttons printed in pink (page 10).
QMASTER VOL +/–
Adjust the volume level of all speakers at the
same time.
RMUTING
Turns off the sound temporarily.
Press the button again to restore the sound.
SRETURN/EXIT O
Returns to the previous menu.
YAUTO VOL
Adjusts the volume automatically depending on
the input signal or content from the connected
equipment (ADVANCED AUTO VOLUME
function).
This function is useful, for example, when the
sound of a commercial is louder than the TV
programs.
Notes
• Be sure to reduce the volume level before you
turn off this function.
• As this function is available only when Dolby
Digital, DTS or Linear PCM signals are input,
the sound may suddenly increase when you
switch to other formats.
• This function does not work in the following
cases.
–Linear PCM signals with a sampling
frequency of more than 48 kHz are being
received.
–Dolby Digital Plus, Dolby TrueHD, DTS 96/
24, DTS-HD Master Audio, or DTS-HD
High Resolution Audio signals are being
received.
1)If you press AV ?/1 (A) and ?/1 (B)
simultaneously, the receiver and connected
equipment will turn off (SYSTEM STANDBY).
The function of the AV ?/1 (A) changes
automatically each time you press the input
buttons (C).
2)The 5/TV, AUDIO, N and TV CH +/SOUND
FIELD+ buttons have tactile dots.
Use the tactile dots as references when operating
the receiver.
To control a Sony TV
Hold down TV (P), then press the button
printed in yellow to select the function you
want.
Example: Hold down TV (P), then press TV
CH + (N).
ATV ?/1 (on/standby)
Turns the TV on or off.
CNumeric buttons2)
Selects the TV channels.
ENTER
Enters the selections.
CLEAR
Use with the numeric buttons to select the
channel numbers of the Digital CATV terminal.
For example, to select 2.1, press 2, CLEAR,
and 1.
FDISPLAY
Displays information related to the current TV
program.
HColor buttons
Displays an operation guide on the TV screen
when the color buttons are available. Follow the
operation guide to perform a selected operation.
KTOOLS/OPTIONS
Displays the TV function options.
,V/v/B/b
.>
Xx
1Hold
down
TV
2Press
TV CH +
continued