Distance
| Distance | Distance |
| ||||
|
| (Table 2) |
|
| |||
|
|
|
| ||||
| (Table 1) | Other than HSS |
| HSS |
| ||
|
|
|
| ||||
|
|
|
|
|
|
| |
Shutter speed | All shutter speeds | Sync speed or slower | 1/250 sec | 1/500 sec | 1/1000 sec | 1/2000 sec | |
| |||||||
Aperture | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
2.8 | 1.4 - 5 | 1.4 - 5 | 1 - 3.5 | 1 - 2.5 | 1 - 1.7 | 1 - 1.2 | |
|
|
|
|
|
|
| |
4 | 1 - 5 | 1 - 5 | 1 - 2.5 | 1 - 1.7 | 1 - 1.2 | – | |
|
|
|
|
|
|
| |
5.6 | 1 - 5 | 1 - 5 | 1 - 1.7 | 1 - 1.2 | – | – | |
|
|
|
|
|
|
| |
|
|
|
|
|
| Units: m |
•The distances in the above table assume the use of ISO 100. If ISO 400 is used the distances must be multiplied by a factor of two (assume a limit of 5 m).
•The flash range is not displayed on the LCD panel when using wireless flash.
Notes on wireless flash
•You cannot use a flash meter or color meter in wireless flash mode because the
•Test flash for the wireless flash is in the currently selected test flash mode. One flash occurs with [TEST1] and three flashes with [TEST3]. Flashes continue for four seconds with [TESTM]. For details of test flash, See “Custom setting” (page 74).
•The zoom position for the
•In wireless flash mode, ADI metering is canceled and
•Multiple flash cannot be used.
•If another wireless flash is being used nearby, you can change the channel in the custom settings to prevent interference (page 74).
•When photographing with the wireless flash, the flash unit may in rare cases go
off by mistake due to ambient static electricity or electromagnetic noise. When the flash is not in use, select [ ] using the MODE button.
56