If you connect more than two USB devices to your computer, normal operation will not be guaranteed.
Use of this IC recorder with a USB hub or a USB connection support cable other than the supplied cable is not guaranteed.
A malfunction may occur depending on the USB devices connected at the same time.
Before connecting the IC recorder to the computer, make sure that the battery is inserted in the IC recorder.
It is recommended that you disconnect the IC recorder from the computer when you are not using the IC recorder connected to the computer.
Disconnecting the IC recorder from your computer
Follow the procedures below; otherwise, data may be damaged.1 Make sure that the operation indicator is not flashing.2 Disconnect the IC recorder from the USB connector of the computer.Precautions
On power
Operate the unit only on 1.5 V or 1.2 V DC. Use one LR03 (size AAA) alkaline battery or one
On safety
Do not operate the unit while driving, cycling or operating any motorized vehicle.
On handling
Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.
Should any solid object or liquid fall into the unit, remove the battery and have the unit checked by qualified personnel before operating it any further.