TIME SET

 

 

--

+

 

 

 

ALARM

RADIO

CLOCK

A RADIO B BUZZER

OFF

ON

 

ALARM RESET/

SLEEP

 

 

OFF

 

S

FF

NO

OZE / DATE / SLEEP O

Display
FM wire antenna
AC power cord

AM FM

BAND

VOLUME

TUNING

Installing the Battery

To keep good time, your Dream Machine needs one 6F22 battery (not supplied), in addition to house current. The battery keeps the clock operating in the event of a power interruption. Before setting the time on your Dream Machine, open the lid at the bottom of the unit, install the battery with correct polarity and then close the lid.

After a power interruption, the displayed time may not be always correct (It may gain or lose about 10 minutes per hour).

Knowing When To Replace the Battery

To check battery power, unplug the power cord from the wall outlet and plug it in again after a few minutes. If the displayed time is incorrect, replace the battery with a new one.

Setting the Clock and the Date

Setting the Clock
1Plug in the unit.The display will flash “AM 12:00”.

2While holding down CLOCK, press TIME SET + or until the correct time appears in the display.

When you release CLOCK, the clock begins to operate.

To set the current time rapidly, keep pressing the + or button while holding down CLOCK.

Setting the Date

1While holding down SNOOZE/DATE/ SLEEP OFF, press TIME SET + or until the correct date appears in the display. Then, release SNOOZE/DATE/SLEEP OFF.

To display the date, press SNOOZE/DATE/SLEEP OFF. The display returns to the current time when you release SNOOZE/DATE/SLEEP OFF.

Playing the Radio

1Press RADIO ON to turn on the radio.2Select FM or AM using BAND.3Tune in a station using TUNING.4Adjust VOLUME to adjust the volume.

To turn off the radio, press RADIO OFF.

To improve radio reception

FM: Extend the FM wire antenna fully to improve reception.

AM:Rotate the unit horizontally for optimum reception. A ferrite bar antenna is built into the unit.

Setting the Alarm

To set the radio alarm, first tune in a station and adjust the volume.

1While holding down ALARM A RADIO (for the radio) or B BUZZER (for the buzzer), press TIME SET + or until the desired time appears in the display. When you release ALARM A or B, the ALARM A or B indicator stops flashing and lights up, and the current time appears in the display.

The alarm will come on at the preset time and automatically turn itself off after 59 minutes.

If you set ALARM A and ALARM B at the same desired time, only ALARM A will work.

To shut off the alarm, press RADIO OFF•ALARM RESET/OFF.

The alarm will come on at the preset time the next day.

To cancel either alarm, while holding down the

ALARM A or ALARM B button, press RADIO OFF•ALARM RESET/OFF.

To check the preset time, press ALARM A or B.

To Doze a Few More Minutes

1Press SNOOZE/DATE/SLEEP OFF.

The radio or buzzer will shut off but will automatically come on again after about 6 minutes. You can repeat this process as many times as you like.

You can reset the alarm time while activating the snooze function.

Setting the Sleep Timer

Enjoy falling asleep to the radio using the built-in sleep timer that shuts off the radio automatically at a preset time.

1Press RADIO ON/SLEEP.

The radio turns on. It will go off after the preset time has passed. You can set the sleep timer of 90, 60, 45, 30 or 15 minutes.

Every push changes the display as follows.Current timenOn n90 n60 15 N30 N45 N

The radio will play for the time you set, then shut off.

To turn off the radio before the preset time, press SNOOZE/DATE/SLEEP OFF.

To Use Both Sleep Timer and Alarm Function

You can fall asleep to the radio sound and you will be awakened by the radio/buzzer alarm at the preset time.

1Set the alarm. (See “Setting the Alarm”.)2Set the sleep timer. (See “Setting the Sleep Timer”.)

Precautions

Operate the unit on the power sources specified in “Specifications”.

To disconnect the power cord, pull it out by the plug, not the cord.

Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that block the ventilation holes.

Should anything fall into the unit, unplug the unit and have it checked by qualified personnel before operating it further.

To clean the casing, use a soft cloth dampened with a mild detergent solution.

Battery Warning

When the unit will be left unplugged for a long time, remove the battery to avoid undue battery discharge and damage to the unit from battery leakage.

If you have any questions or problems concerning your unit please consult your nearest Sony dealer.

Specifications

Frequency range

FM : 87.5 – 108 MHz

AM: 530 – 1605 kHz

Speaker

Approx. 6.6 cm (2 5/8 inches) dia. 8 ohms

Power output

120 mW (at 10 % harmonic distortion)

Power requirements 120 V AC, 60 Hz

For power backup: 9 V DC, one 6F22 battery

Battery life

Approx. 35 hours using the Sony S-006P (U) battery

Dimensions

Approx. 120 x 124 x 132 mm (w/h/d)

(4 3/4 x 5 x 5 1/4 inches) incl. projecting parts and controls

Mass

Approx. 660 g (1 lb 7.2 oz) not incl. battery

Design and specifications are subject to change without notice.