FM/AM CD Kitchen
Clock Radio
Operating Instructions
Owner’s Record
The model number and the serial number are located on the top.Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
Model No.For customers who purchased this product in the USA Please register this product on line at http://www.sony.com/productregistration .
Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you.
ICF-CDK50
© 2007 Sony Corporation | Printed in China |
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.
Do not install the appliance in a confined space, such as a bookcase or
A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.
Music discs encoded with copyright protection technologiesThis product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.
CAUTIONThe use of optical instruments with this product will increase eye hazard.Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
To reduce the risk of fire, do not place any heating or cooking apparatus beneath this unit.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
For customers in the USAPlease register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new product, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you.
Important Safety Instructions1)Read these instructions.2)Keep these instructions.3)Heed all warnings.4)Follow all instructions.5)Do not use this apparatus near water.6)Clean only with dry cloth.7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
Precautions
Use the power source specified in the |
“Specifications” to operate the unit. |
The nameplate indicating operating voltage, power |
consumption, etc. is located on the top exterior. |
To disconnect the power cord (mains lead), pull it |
out by the plug, not the cord. |
Troubleshooting
Should the problem persists after you have made the following checks, consult your nearest Sony dealer.
The clock does not show the correct time.Has an electrical power outage occurred?The CD player does not operate.Did you close the disc tray?Did you place the disc correctly?The disc should be placed with the labeled side up.Dusty or defective
Take out the CD and leave the CD compartment open for about an hour to allow condensation to evaporate.
Sporadic loss of sound during CD operation.Dusty or defectiveRemove any obstacles between the remote and the remote sensor on the unit, and move the unit away from fluorescent lights.
Point the remote at the system’s sensor.Move the remote closer to the system.Specifications
AUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTIONWith100 – 10 000 Hz; rated 1.5 W per
Laser diode properties: Emission duration: Continuous Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
1.9 W + 1.9 W (at 4 Ω, 10 % harmonic distortion) |
AC power cord | Cord clamp |
| Spacer |
| L (Low) |
| Template |
| Dot |
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.WARNINGDanger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Replace the battery for the clock backup with a Sony CR2032 lithium battery. Use of another battery may present a risk of fire or explosion.
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.
Dispose of used battery promptly. Keep away from children.Do not leave the unit in a location near a heat source |
such as a radiator or air duct, or in a place subject to |
direct sunlight, excessive dust, mechanical vibration, |
or shock. |
Allow adequate air circulation to prevent internal |
heat |
(a rug, a blanket, etc.) or near material that might |
block the ventilation holes such as a curtain. |
Should any solid object or liquid fall into the unit, |
unplug the unit and have it checked by a qualified |
personnel before operating it any further. |
To clean the casing, use a soft cloth dampened with |
a mild detergent solution. |
The unit is not disconnected from the AC power |
source (mains) as long as it is connected to the wall |
outlet, even if the unit itself has been turned off. |
If you have any questions or problems concerning your unit, please consult your nearest Sony dealer.
Power requirements: 120 V AC, 60 Hz |
For Power backup: 3 V DC, one CR2032 battery |
Dimensions: |
Approx. 350 85 300 mm (w/h/d) |
(Approx. 13 7⁄8 3 3⁄8 11 7⁄8 inches) |
incl. projecting parts and controls |
Mass: Approx. 2.7 kg (6 lb 1 oz) |
Installing the unit under a cabinet
(See Fig. )CautionPlease read the following before installing the unitDue to its heavy weight, the unit should be installed with great care.Installation of the unit requires two persons.Use tools carefully while installing of the unit.Be sure that the cabinet that is used is sturdy enough to support the weight of the unit.
To reduce the risk of fire, do not place any heating or cooking appliance beneath this unit.
Install the unit so that its AC power cord can be connected directly to a wall outlet. Do not use a converter or extension cord.
Be sure that the AC power cord has no slack during use of the unit, since the cord acts as an FM wire antenna. If the AC power cord has some slack, wind it around the cord hook so as to eliminate the slack.
The unit has a
Install the unit as far as possible from sources of noise (for example, a refrigerator, microwave oven or fluorescent lamp).
This unit is not waterproof. Install it where it will not be exposed to splashing by water, as this may damage the unit.
To reduce the risk of fire or electric shock, do not touch the AC power cord with wet hands.
Never place objects between the top of the unit and the bottom of the cabinet. This could cause the unit to fall.
Make sure the unit’s four screws are fastened tightly.After installing the unit, do not pull down on it or hang something heavy on it.
1Decide on the installation location and orientation of the unit based on the best reception that is possible (see “Improving the reception”).
2Mark the position of the 4 holes by using the supplied template. Use a drill to make
the holes (size 6.5 mm diam., 9/32 inch). (See Fig.3When the cabinet door overhangs the shelf and obstructs the unit, you can adjust the unit/shelf height.
First set the L mark to the dot which becomes the lowest position, then you can adjust the height in 4 steps (HL) by turning the spacer counterclockwise (See Fig.