Basic operation

Overview of the remote control buttons

VIDEO / button

Press to switch off your VCR or DVD temporarily. Press again to resume normal operation.

DIGITAL/ button

Press to switch between digital and analogue mode.

Screen format button

Press repeatedly to change the screen format.

Buttons 0 - 9

When the Media Selector is set ot TV or VCR, press to input the required channel number. For numbers 10 and above, enter the second digit within 2 seconds.

Info button / Reveal button

In TV Mode: Press to display the INFO menu in digital mode. When watching analogue programmes press to reveal information such as programme number etc.

In Teletext mode: Press to reveal concealed information (e.g. answers to a quiz). Press again to cancel.

Coloured buttons

These buttons are used for the text and digital menus. Refer to the relevant sections in this instruction manual.

EPG button

Press to display the Electronic Programme Guide when in digital mode.

MENU button

Press to enter the menu system of this TV.

Media Selector button

This remote operates not only Sony DVDs and VCRs, but also those made by other manufacturers. Press this button repeatedly to select the type of equipment you want to control. A green light appears momentarily to indicate the mode selected.

Note:

Before operating your VCR or DVD, you must enter the correct configuration code. Please refer to the section ‘Remote control operation for VCR and DVD players’.

Volume + and - button

Press to adjust the volume to the desired level.

VIDEO /

TV /

DIGITAL

1 2 3

4 5 6

7 8 9

0

OK

MENUREC

TV

VCRDVD

PROG

TV / button

Press to switch off your TV temporarily. The red indicator on the front of the TV illuminates. Press again to resume normal operation.

Input button /Hold button

Press to select signals from equipment connected to the TV sockets (refer to ‘Connecting other equipment to the TV’).

In text mode press to keep a page on display. Press again to cancel.

Previous channel button

While watching analogue TV pressing this button will return you to the previous channel you were watching.

While watching digital TV pressing this button can also act as an ‘EXIT’ key and cancel any digital text application that may be running.

Text button

Press to enter the text mode.

Control pad

Use these buttons to navigate through the menu system of the TV.

Note:

When the Media Selector button has been set to VCR or DVD, the control pad operates the main functions of your VCR or DVD.

OK button

In analogue mode press to display a list of channels on screen. Press the V or v button to scroll through the list until the channel you wish to view is highlighted, then press the OK button to display that channel on screen.

In digital mode press to display the Channel Index menu.

REC button

When the Media Select switch is set to VCR, press this button to begin recording.

PROG +/- button

In TV mode: Press to select the next or previous programme.

In Teletext mode: Press to select the next or previous page.

Mute button

Press to mute the sound. Press again to restore.

9