Digital features

The Main menu

OK

OK

Software Download

Periodically Sony will issue updates for the software that controls your TV. This feature will allow you to automatically receive updates through your existing aerial.

1.

Press the

button on the remote control to obtain the Digital Info menu.

 

Press the BLUE button to display the Main menu.

2.

Press the V or v button to highlight ‘Detail Set-up’ then press the OK button to

 

display the Detail Set-up menu.

3.

Press the V or v button to highlight ‘Software Download’ then press the OK

 

button to display the Software Download menu.

4.

Press the V or v button to change the ‘Current Setting’. If you wish to receive

 

downloads, set the ‘Current Setting’ to ‘On’. If you do not wish to receive

 

downloads, set the ‘Current Setting’ to ‘Off’.

5.

Press the OK button to confirm.

6.

Press the BLUE button repeatedly until all menus are removed from the

 

screen.

 

System Information

This is an information screen only. It tells you the current version of the software in your TV together with the signal quality, as indicated by the coloured bar in the display.

1.

Press the

button on the remote control to obtain the Digital Info menu.

 

Press the BLUE button to display the Main menu.

2.

Press the V or v button to highlight ‘Detail Set-up’ then press the OK button to

 

display the Detail Set-up menu.

3.

Press the V or v button to highlight ‘System Information’ then press the OK

 

button to display the System Information display.

4.

Press the BLUE button repeatedly until all menus are removed from the

 

screen.

 

CAM Setup

(depending on availability of service)

This feature allows you to access a pay-TV service once you have obtained a Conditional Access Module (CAM) and a viewing card. Please contact a pay-TV supplier for details.

1.

Switch off the TV and unplug from the mains, and insert the CAM into the

 

 

 

 

 

 

 

 

 

socket on the rear of the TV.

 

Note:

 

 

 

 

 

 

If you have already attached the door that covers the rear sockets you will have to

 

unscrew and remove this to gain access to the CAM socket.

2.

After inserting your viewing card into the CAM, connect the TV to the mains

 

and switch on.

 

 

 

 

 

3.

Press the

button on the remote control to obtain the Digital Info display,

 

then press the BLUE button to display the Main menu.

4.

Press the V or v button to highlight ‘CAM Setup’, then press the OK button to

 

display the set up menu of the service provider.

18