TV menu system

OK

DIGITAL /

OK

Features menu

This menu allows you to set the sleep timer and to set a signal to be output from the AV3 socket. The table below explains each option and how to use it:

Auto Format

 

 

 

 

 

 

 

With this option switched on, the TV can automatically

Press V or v to select ‘On’

or

adjust the picture size to suit the broadcast.

‘Off’. Press OK to confirm.

 

 

 

 

 

 

 

 

 

Format Correction*

 

 

 

 

 

(*only if ‘Auto Format’ is switched on)

 

 

When viewing 4:3 or 14:9 broadcasts there will be dark

Press V or v to select ‘On’

or

areas

visible

at the edge of the

screen. The settings

‘Off’. Press OK to confirm.

 

available are:

 

 

 

 

 

 

 

Off: Dark areas remain on the TV screen.

 

 

On: The TV automatically switches to Smart mode,

 

 

eliminating any dark areas on the TV screen.

 

 

 

 

 

 

 

 

 

 

 

Sleep Timer

 

 

 

 

 

Press V or v to select the period

This option allows you to set a period of time after which

the TV switches itself into standby mode. This can be in 10

of time required. Press OK to

minute intervals up to a maximum of 90 minutes.

confirm.

 

 

 

 

 

 

 

 

 

 

AV3 Output

 

 

 

 

 

Press V or v to select TV, AV1,

This option allows you to set which signal source is output

from the AV3 scart socket (labelled

3/

 

s 3 ) on the rear of

AV2, AV3, or AV4. Press OK to

 

the TV. If you connect a VCR to this socket you can record

confirm.

 

from equipment connected to the other sockets of the TV.

 

 

The settings available are:

 

 

 

 

 

Ana. TV: Always outputs the tuned analogue TV signal.

 

 

Digi. TV: Always outputs the tuned digital TV signal.

 

 

AV1:

Outputs the signal from equipment connected to

 

 

AV2:

the

 

1 socket on the rear of the TV.

 

 

 

 

 

Outputs the signal from equipment connected to

 

 

AV3:

the

 

 

2 socket on the rear of the TV.

 

 

 

 

 

 

Outputs the signal from equipment connected to

 

 

AV4:

the

 

3/ s 3 socket on the rear of the TV.

 

 

Outputs the signal from equipment connected to

 

 

 

the

 

4/ s 4 socket on the front of the TV.

 

 

 

 

 

 

 

 

 

 

 

 

Set Up menu

This menu contains the following advanced features that allow you to customise the TV.

To check which mode you are in, press the button on the remote control. If you are watching a digital programme, an Info display appears on screen providing brief details

for the current and next programme. If this happens, press the DIGITAL/ button on the remote control to switch to analogue channels.

Auto Tuning

(for analogue channels only)

All the available channels were tuned in when the TV was first installed. The ‘Auto Tuning’ option in the ‘Set Up’ menu allows you to repeat that process (e.g. to re-install the TV at an alternative location or search for new channels that have been launched by broadcasters). With the ‘Auto Tuning’ option highlighted, press b to select. The autotune prompt appears on screen. Press OK to start the auto tuning process. When all available channels have been tuned the TV returns to normal operation.

Programme Sorting

(for analogue channels only)

The ‘Programme Sorting’ option in the ‘Set Up’ menu allows you to change the order in which the channels are stored on the TV. With the ‘Programme Sorting’ option highlighted, press b to enter the ‘Programme Sorting’ menu. Press v or V to highlight the channel you wish to move to a new position, then press b to select. Press v or V to highlight the new position for your channel, then press OK. Your chosen channel has now moved to the new position. Repeat to move other channels if required.

AV Preset

The ‘AV Preset’ option in the ‘Set Up’ menu allows you to assign a name to any equipment connected to the AV sockets of the TV. The name is displayed briefly on screen when the equipment is selected. With the ‘AV Preset’ option highlighted, press b to enter the ‘AV Preset’ menu. Press v or V to highlight the socket you wish to name. Press b to select the LABEL column. Press v or V to select the first character. Press b to confirm this character. Select the other characters in the same way (up to a maximum of five characters). After selecting all required characters, press OK to store.

Manual Set Up

With the ‘Manual Set Up’ option highlighted, press b to enter the ‘Manual Set Up’ menu. The ‘Manual Set Up’ menu is explained on the following page.

25