Digital features

The Digital Info display

This display gives you information both on the current programme being shown and on future programmes when available from the broadcaster (up to 24 hours ahead).

1.

2.

3.

Press the button on the remote control to view the Info display. If the display does not appear, press the DIGITAL/ button to switch to digital mode, then press the button to view the Info display.

Press the b button to obtain a brief description of the next programme in the schedule. If the programme box is blank, there is no information currently available. To return to the starting point, press the B button repeatedly until the description for the current programme reappears.

Press the button on the remote control at any time to exit the Info display.

Using other Info features

Subtitles

This feature places digital subtitles on the screen. With the Digital Info display on screen, press the RED button to access the ‘Subtitles’ pop-up menu. Press the V or v button to highlight the language you wish the subtitles to appear in, then press OK to select.

OK

Audio

When a multi language broadcast is available, this feature allows you listen to the broadcast in your selected language. With the Digital Info display on screen, press the GREEN button to access the ‘Audio’ pop-up menu. Press the V or v button to highlight the language required then press OK to select.

Timers

When you highlight a current programme, the ‘Timers’ feature allows you to automatically set your VCR to record the selected programme (only if you have a Smartlink VCR), or you can select ‘Wake up’ to have the TV switch to the correct channel automatically when the programme starts. Press the b button to select a future programme from the Info display, then press the YELLOW button to display the ‘Timers’ pop-up menu.You can then choose from a) Record b) Wakeup or c) Manual.

a) Record

Highlight ‘Record’ and press OK to automatically set your VCR to record the selected programme (this will only work if your VCR has SmartLink capability and is connected to the AV3 socket 3 s 3 on the rear of this TV).

b) Wakeup

Highlight ‘Wakeup’ and press OK if you wish the future programme you selected to appear on-screen when transmission begins.

c) Manual

Highlight ‘Manual’ and press OK if you wish the TV to output a channel to your VCR for recording. Press the V or v button to set the day of recording, then press the b button to move to the start time. Repeat this procedure to set the start and stop times and the channel number, then press the OK button to store and return to the Info menu. Press

the button to remove the Info menu from the screen. Unless you have a Smartlink VCR, you must now set the timer recording function of your VCR to switch on and off to correspond with the programme you have stored for recording.

Notes on recording:

The ‘Manual’ feature only works if you have connected your VCR to the AV3 socket 3 s 3 on the rear of the TV.

After you have programmed a recording you can put the TV into its standby mode, but do not switch off completely or the recording will be cancelled. If you put the TV into standby mode, the standby indicator on the front of the TV flashes green periodically to remind you a recording has been programmed. Once a programme has started recording, do not change channels or switch to analogue mode or the recording will be cancelled.

Set-up

Press to display the Main Menu (see next page).

14