Getting started

5 Automatically tuning the TV

1

2

3

 

 

4

5

6

 

7

8

9

 

 

0

 

OK

PROG

1.

When you switch on the TV for the first time, the Sony logo appears on the

 

TV screen followed by the ‘Memory Stick’ logo, then the Language/Country

 

menu with the word ‘English’ highlighted. Press the V or v buttons on the

 

remote control to choose the language you require then press the OK

 

button to confirm.

2.

The word Country is now highlighted. Press the V or v buttons to choose

 

the country in which you wish to operate the TV, then press the OK button to

 

confirm.

 

 

The picture rotation prompt appears. Sometimes the Earth’s natural

 

magnetism can cause the screen to look tilted.

 

a) If no correction is required, press the B button.

 

b) If some correction is required, press the OK button. Press the V or v

 

button to rotate the picture over a range of -5 to +5. Press the OK button

 

to store.

 

 

An autotune prompt appears on screen. Press the OK button to select ‘Yes’.

 

A menu is displayed giving you two options to choose from:

 

Quick tuning:

Tunes in the recommended signals for your location.

 

Full tuning:

Tunes in all the available signals.

Use the V or v buttons to make your choice then press the OK button.

Note:

‘Full tuning’ may take some time to tune in all the available signals. For normal use, we recommend you use the ‘Quick tuning’ feature.

A display appears asking you to press the OK button to begin tuning. As the digital tuning procedure may take some time, a menu is displayed to show you the tuning progress. Please be patient and do not press any buttons once this search and store operation has started.

When the on screen display informs you that the tuning is successfully finished, press the BLUE button repeatedly to remove all menus from the screen. The analogue tuning procedure then begins.

If no digital and no analogue signals are found, a display appears on screen asking you to confirm your aerial is connected. Check your aerial is connected then press the OK button to repeat the tuning procedure.

Once all signals have been captured and stored, the TV returns to normal operation and displays the digital programme captured on programme number 1.

Note:

If no digital signals are captured, then the analogue programme stored on programme number 1 is displayed.

3. To view programmes, press the PROG+/- button or the numbered buttons on the remote control.

6