4 GB
Start-up Guide1: Checking the accessories
Remote RM-ED017 (1)
Mains lead (Type C-6) (1) (except for 37/32 inches)
Size AA batteries (R6 type) (2)
Stand (1)
Screws for stand (4)

To insert batteries into the remote

~
Observe the correct polarity when inserting batteries.
Do not use different types of batteries together or mix
old and new batteries.
Dispose of batteries in an environmentally friendly way.
Certain regions may regulate disposal of batteries.
Please consult your local authority.
Handle the remote with care. Do not drop or step on it,
or spill liquid of any kind onto it.
Do not place the remote in a location near a heat source,
a place subject to direct sunlight, or a damp room.
2: Attaching the stand
Follow the assembling steps required to place on a
TV stand.
1Open the carton box and take out the
stand and the screws.
2Place the TV set on the stand. Take care
not to interfere with cables.
3Fix the TV to the stand according to the
arrow marks that guide the screw
holes using the supplied screws.

~

If using an electric screwdriver, set the tightening torque
at approximately 1.5 N·m (15 kgf·cm).
Push and slide to open.