C:\Documents and Settings\All Users\Documentos\SONY
TELES\2009\(08-05)SATELLITE-EX2L(Fact)\PAPER
Satellite\SateliteKDL52W55xx_UK\030STU.fm
masterpage:Left
6 GB
KDL-52/46/40/37/32V5500
x-xxx-xxx-xx(x)
1Install a wood screw (4 mm in diameter,
not supplied) in the TV stand.
2Install a machine screw (M4 × 20, not
supplied) into the screw hole of the TV.
3Tie the wood screw and the machine
screw with a strong cord.
4: Bundling the cables
~
• Do not bundle the mains lead/AC power cord
together with other cables.
5: Performing the initial Set-up
1Connect the TV to your mains socket.
2Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
3
Follow the instructions on the screen.
Satellite Auto Tuning: Confirm that the
tuning settings are the same that your
satellite settings.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your
cable provider. If no channel is found
using “Quick Scan”, try “Full Scan”
(though it may take some time).
For a list of compatible cable providers,
refer to the support web site:
http://support.sony-europe.com/TV/
DVBC/
~
• You can also tune channels manually.
Programme Sorting: If you want to
change the order of analogue channels,
follow the steps in “Programme Sorting”.
Eco Preset: When you select “Yes”, the
“Eco” settings are changed into
recommended values to reduce power
consumption.
010COV.book Page 6 Friday, September 25, 2009 4:36 PM